Home » Brushed Nickel Scroll Wall Registers
Brushed Nickel Scroll Wall Registers
Ready to Buy?
Air conditioning vents can be in your floor, wall, or ceiling. Unfortunately, one register cover won't work in every location. Vent covers for the wall and ceiling need to have holes for mounting screws and be lightweight, so there is no danger they will fall out of place.
The Brushed Nickel Scroll Wall Register is made of lightweight, plated steel and comes with a plastic damper box (also known as an air deflector). Each register weighs about two pounds, so there is no danger it will fall out of place.
Mounting screws are included with each wall register. Simple screw them through the mounting holes and into the wall and your vent will be covered safely and securely.
These registers can be used as floor registers but only in areas with very light foot traffic. Because of their lightweight design they won't stand up to foot traffic as well as a more heavy-duty vent cover that was specifically designed to work as a floor register.
- Comes in Brushed Nickel finish.
- Includes all necessary wall screws.
Need Help Measuring for your Wall Registers?
All of our wall register sizes are based on the opening in your wall where the actual register will fit. Click the link below to see a diagram of how to measure:
Common Wall Register Sizes
The chart below details the most common wall opening sizes and the size of the registers that fit in them. All of our registers are measured based on the opening size of your wall. All sizes below are not available in all styles. Please call if you don't see your size and we'll try our best to get you a custom one! All sizes approximate.
|Wall Opening Size||Register Size (W x L)|
|6" x 10"||7 1/2" x 11 1/2"|